Getting your Furrion RV oven lit can feel like a tricky job at first. Don’s worry, it’s easy once you know the steps. This guide helps you light your Furrion oven safely and quickly. We will walk through the normal way and what to do if your Furrion oven pilot light won’t light. We cover common RV oven lighting problems and how to fix them.
Image Source: i.ytimg.com
Getting Ready to Light Your Oven
Before you start igniting your Furrion RV range, let’s make sure you are ready. A few simple checks keep you safe. They also help make sure the oven works right. This is part of any good Furrion oven operation guide.
Safety First, Always
Gas appliances need care. Your Furrion gas oven is no different. Always follow safety rules.
- Check for Gas Leaks: Smell for rotten eggs. That smell means gas. If you smell gas, turn off the gas supply right away. Open all windows and doors. Get out of the RV. Do not use any electric items. Do not light anything. Get help from a pro.
- Ventilate the Area: Make sure you have fresh air. Open a window or turn on a vent fan. This lets fresh air in. It pushes old air out. This is very important when using gas.
- Keep Things Clear: Do not have things near the oven flame. Curtains, towels, or paper can catch fire. Keep the area around the stove and oven clear.
- Know Your Gas Supply: Make sure your propane tank has gas. Make sure the tank valve is open. Check that the gas line is connected right. Sometimes RV oven lighting problems come from having no gas flow Furrion oven.
Checking Your Oven Parts
Look at your oven. Know where things are.
- The Knob: This controls the oven. It turns the gas on and off. It also sets the temperature. You will use it to start the pilot light.
- The Igniter Button: Most Furrion ovens have an igniter. It makes a spark. This spark lights the gas. It is usually a push button.
- The Pilot Light Area: This is a small tube inside the oven. It’s where a tiny flame stays on while the oven is in use. You must light this first.
- The Main Burner: This is bigger. It’s inside the oven cavity. This burner makes the heat for baking. The pilot light lights this main burner.
Knowing these parts helps you follow the Furrion oven lighting procedure.
The Basic Furrion Oven Lighting Procedure
Let’s light the Furrion oven pilot light first. This is the main step. Then we light the main burner. This is how you typically use your Furrion gas oven ignition system.
Step 1: Getting to the Pilot Light
Open the oven door fully. Look inside the bottom of the oven. You will see a small metal tube. This is the pilot tube. Near the end of this tube is where the pilot flame starts. There is usually a small shield or cover near it.
Step 2: Turning the Knob to Pilot
Find the oven control knob. It has pictures or words around it. Look for a picture of a small flame or the word “PILOT.” Turn the knob to this “PILOT” spot.
Step 3: Pushing and Holding the Knob
This is a key step for the Furrion oven pilot light. You must push the control knob IN. Push it all the way in. While holding it in, gas starts to flow only to the pilot light. You need to keep holding the knob in for the next step.
Step 4: Making the Spark (Igniting)
While still holding the knob in and turned to “PILOT”, use your igniter.
- Using the Built-in Igniter: If your oven has a spark button, push it many times. Push it quickly. You will hear a clicking sound. This sound is the spark. The spark happens near the pilot tube. Watch the pilot tube carefully.
- Manually Lighting the Pilot: Sometimes the built-in igniter doesn’t work. Or your oven doesn’t have one. You can manually light RV oven pilot light. While holding the knob in and on “PILOT”, use a long lighter or a long match. Put the flame right next to the end of the pilot tube. Be careful not to burn yourself. Use a long tool!
Step 5: Watching for the Pilot Flame
Look closely at the end of the pilot tube. You should see a small blue flame appear. This is the Furrion oven pilot light. It’s small, but it’s important.
Step 6: Keep Holding the Knob
Once you see the pilot flame, keep holding the oven control knob in. You need to hold it for about 30 to 60 seconds. Why? Gas ovens have a safety device. It checks if the pilot light is on. It needs time to get warm. This device is called a thermocouple. Holding the knob in lets gas flow while the thermocouple warms up. If you let go too soon, the flame will go out.
Step 7: Releasing the Knob Slowly
After holding for the right time (30-60 seconds), slowly let go of the oven control knob. Do not just let it pop out. Let it come out gently. Watch the pilot flame. It should stay lit. If it goes out, go back to Step 2 and try again. Make sure you hold the knob long enough. This step is often where people have trouble when the Furrion oven pilot light won’t light.
Step 8: The Pilot Light is On
Great job! The small pilot light is now on. It will stay on as long as the control knob is not in the “OFF” position. This small flame is now ready to light the main oven burner when you need heat.
Lighting the Main Oven Burner
Now that the pilot light is on, lighting the main burner is fast. This is the second part of the Furrion gas oven ignition.
Step 1: Turn the Knob to the Temperature
The pilot light is lit and staying on. Now, turn the oven control knob to the temperature you want. For example, turn it to 350°F (175°C).
Step 2: Watch for the Main Burner
As you turn the knob past the “PILOT” setting towards a temperature, you will hear gas flowing. Watch the main oven burner inside the oven bottom. The small pilot flame will ignite the gas coming from the main burner. You will see a much larger blue flame spread across the main burner.
Step 3: Check the Flame
The main burner flame should be blue. It should burn evenly. A yellow or orange flame might mean the gas is not burning cleanly. This can point to RV oven lighting problems or a need for cleaning.
Step 4: Close the Door
Once the main burner is lit, you can close the oven door. The oven will now heat up to the temperature you set.
This whole process is the standard Furrion oven lighting procedure. It might take a couple tries the very first time you do it.
Manually Light RV Oven (When the Igniter Fails)
What if your electric igniter doesn’t spark? This is a common RV oven lighting problem. Don’t worry, you can still use your oven. You just need to manually light RV oven burners.
Why Manual Lighting is Needed
The electric igniter might fail for a few reasons.
- It could be wet or dirty.
- The wire might be loose.
- The spark module might be broken.
- Sometimes, low battery voltage in your RV can affect the sparker.
Knowing how to manually light RV oven parts means you can still cook even if the igniter stops working.
Steps for Manually Lighting the Pilot
We covered this quickly before, but let’s go over it again clearly.
- Open the Oven Door: Fully open it so you can see inside well.
- Turn Knob to PILOT: Turn the oven control knob to the “PILOT” position.
- Push and Hold Knob: Push the knob IN all the way. Gas flows to the pilot tube now. Keep holding it.
- Use a Long Lighter/Match: Get a long gas lighter or a long wooden match. Light it.
- Apply Flame to Pilot: Put the flame right at the end of the pilot tube. Be careful! Keep holding the oven knob in.
- Watch for Pilot Flame: A small blue pilot flame should appear.
- Hold Knob (30-60 secs): Once you see the pilot flame, keep holding the oven knob in for 30 to 60 seconds. This lets the safety device (thermocouple) get hot.
- Release Knob Slowly: Gently let the knob come out. The pilot flame should stay on. If it goes out, repeat steps 2-8, holding the knob longer this time.
Steps for Manually Lighting the Main Burner
Once the pilot light is safely on and staying on:
- Turn Knob to Temp: Turn the oven control knob from “PILOT” to the baking temperature you want.
- Watch Main Burner: Gas will flow to the main burner. The pilot flame should light it automatically.
- If Main Burner Doesn’t Light: Sometimes the pilot flame is weak or in the wrong spot. While gas is flowing to the main burner (knob is on temp), you might need to use your long lighter/match again. Carefully bring the flame to the main burner tube itself. It should light the gas cloud quickly. Pull your hand and lighter away fast once it lights. This is less common but good to know if you’re troubleshooting Furrion oven ignition issues.
Always be very careful when manually lighting any gas appliance. Use long tools to keep your hands safe.
Troubleshooting Furrion Oven Ignition Issues
Sometimes things don’t work as planned. RV oven lighting problems are common. Here are some issues and what might be causing them. This helps with troubleshooting Furrion oven ignition problems.
Furrion Oven Pilot Light Won’t Light
This is perhaps the most common problem. The pilot flame just won’t appear or won’t stay lit.
- No Gas Flow: Is the propane tank empty? Is the valve on? Is the regulator working? Are other gas appliances (like the stove top) working? If nothing works, it’s likely a gas supply issue. If other things work, the problem is just with the oven. Check the gas line specifically to the oven for kinks or blockages (rare but possible).
- Not Holding Knob Long Enough: This is a very frequent mistake. You MUST push and hold the knob in for 30-60 seconds after the pilot light is visible. The safety device needs time to heat up. If you let go too soon, it cuts the gas flow.
- Dirty Pilot Tube: The small hole where the gas comes out for the pilot can get clogged. Dust, grease, or spiderwebs can block it. A blocked tube means no gas or very little gas gets to the igniter/flame. You can often gently clean this area with a soft brush (like a toothbrush) or blow air into it (when gas is OFF!). Make sure the power and gas are OFF before cleaning.
- Dirty Igniter: If using the built-in igniter, the tip might be dirty. Grease or food can cover the spark point. Clean it gently with a brush. Make sure it’s dry.
- Igniter Spark is Weak or Missing: The distance between the igniter tip and the pilot tube needs to be right. Check your oven’s manual for the correct gap. The igniter might be faulty, or there might be an electrical problem. Low RV battery voltage can sometimes cause a weak spark.
- Drafts: Strong drafts (from open windows, vents) can blow out the tiny pilot flame right after it lights or before the safety device warms up. Close nearby windows or vents temporarily.
- Faulty Thermocouple: If the pilot light does light and you hold the knob for over a minute, but it goes out when you release the knob, the thermocouple might be faulty. This safety device signals to keep the gas flowing. If it doesn’t work, the system thinks the pilot is off and cuts the gas. This part needs replacing. It’s usually best done by a qualified tech.
- Faulty Gas Valve: In rare cases, the gas valve itself (controlled by the knob) might not be working right. It might not let gas flow to the pilot, or it might not stay open after the knob is released. This also requires a tech.
No Gas Flow Furrion Oven (General Issue)
If you get absolutely no gas smell or sound when you push and hold the knob to “PILOT”, this suggests a gas flow issue before the oven valve.
- Empty Propane Tank: Simple, but happens often.
- Tank Valve Closed: Make sure the valve on the tank is fully open.
- RV Main Gas Valve Closed: Some RVs have a main shut-off valve near the tanks or main line. Ensure it’s open.
- Faulty Regulator: The regulator on the propane tank reduces the high pressure in the tank to a safe, lower pressure for your appliances. If it’s frozen (can happen in cold weather) or broken, gas won’t flow correctly. Try warming a frozen regulator carefully (warm water, never a flame!). If it’s broken, it needs replacement.
- Emergency Shut-off Triggered: Sometimes, if a gas line is opened too fast at the tank, a safety flow limiter can restrict the gas flow severely. Close the tank valve, wait a few minutes, and open it very slowly.
Main Burner Doesn’t Light
The pilot light is on, but when you turn the knob to a temperature, the main burner doesn’t light.
- Pilot Flame Not Reaching Burner: The pilot flame might be too small, weak, or positioned incorrectly. It needs to be close enough to the main burner tube to ignite the gas coming out. A dirty pilot tube can cause a weak flame.
- Gas Not Reaching Main Burner: The part of the control valve that lets gas go to the main burner might be blocked or faulty.
- Dirty Main Burner Tube: Like the pilot, the main burner tube holes can get blocked, preventing gas from coming out evenly.
- Drafts: A strong draft could blow out the main burner flame as it tries to light.
Table of Common Issues and Quick Checks
| Problem | Possible Cause | What to Check / Try |
|---|---|---|
| Pilot light won’t light | No gas supply | Propane tank level, tank valve, RV main valve, other appliances working? |
| Not holding knob long enough | Hold knob IN for 30-60 seconds after lighting pilot. | |
| Dirty pilot tube/igniter | Gently clean pilot area and igniter tip (gas OFF!). | |
| Weak/no igniter spark | Check igniter tip cleanliness and gap. Try manual lighting (long lighter). | |
| Faulty thermocouple | If pilot lights but goes out when releasing knob (after holding), likely thermocouple. | |
| Drafts | Close windows/vents near oven. | |
| No gas flow to oven (at all) | Empty tank, closed valves, regulator | Check tank, all valves. Are other gas items working? Check regulator. |
| Main burner won’t light | Pilot flame weak/misplaced | Clean pilot area. Ensure pilot flame is strong and stable. |
| Dirty main burner | Gently brush main burner tube holes (gas OFF!). | |
| Gas valve issue | If pilot works but no gas to main burner when turning knob, valve might be faulty. |
This table gives you a quick guide for troubleshooting Furrion oven ignition problems. Always turn off the gas supply when cleaning oven parts.
Keeping Your Furrion Oven Working Well
Regular care helps prevent RV oven lighting problems. Following a simple Furrion oven operation guide for cleaning and checks makes a big difference.
Cleaning Inside the Oven
Food spills happen. Baked-on grease can cause smells and even interfere with burner operation if it gets into the tubes.
- Wipe Spills Right Away: Clean up spills after the oven cools. This stops them from baking on hard.
- Use Oven Cleaner (Carefully): Find an oven cleaner safe for RV ovens. Some strong cleaners can damage parts. Follow the cleaner’s directions exactly. Make sure the oven is cool and the gas is OFF. Make sure you rinse it out well.
- Avoid Burner Parts: Do not spray cleaner directly into the pilot tube or main burner holes. Clean around them.
Cleaning the Burner and Pilot Area
Over time, dust, crumbs, or cooking vapors can block the gas openings.
- Turn Off Gas and Power: This is a must! Close the valve on your propane tank.
- Use a Soft Brush: A soft brush, like a new toothbrush or a small paintbrush, is good. Gently brush around the pilot tube opening. Brush the holes on the main burner tube.
- Use Compressed Air: A can of compressed air (like for cleaning computers) can blow out dust and cobwebs from the tubes. Aim carefully.
- Check Igniter Tip: If you have a built-in igniter, gently clean the ceramic part and the metal tip with a soft cloth or brush. Make sure it’s not bent too far from the pilot tube.
Checking Gas Connections
Periodically, check the gas line connection at the back of the oven.
- Visual Check: Look for any signs of damage to the hose or fittings.
- Leak Test: If you suspect a leak (smell of gas), you can use a special leak detection fluid or soapy water. Brush it on the connections. If bubbles appear, you have a leak. Turn off the gas immediately and get it fixed by a pro.
These simple steps help ensure your Furrion gas oven ignition system stays clean and works right, reducing the chance of your Furrion oven pilot light won’t light.
Advanced Troubleshooting: When to Call a Professional
While many RV oven lighting problems have simple fixes (like holding the knob longer or cleaning), some issues need a pro.
When You Need Expert Help
- Suspected Gas Leaks: If you smell gas and cannot find a simple fix (like a valve being slightly open but leaking at a joint), evacuate and call for help. Do not try to fix gas leaks yourself.
- Faulty Gas Valve or Regulator: These parts are critical for safety and proper operation. They should only be replaced by someone trained to work with RV gas systems.
- Thermocouple Replacement: While possible for a DIYer with mechanical skills, working on gas components requires care. If you’re not comfortable, have a technician do it.
- Ongoing Ignition Problems: If you’ve cleaned everything, checked the gas supply, are holding the knob correctly, and your Furrion oven pilot light still won’t light reliably, there might be a hidden issue within the oven’s gas control system.
A certified RV technician or a gas appliance technician can diagnose and fix these more complex issues safely. They have the right tools and knowledge.
Grasping the Purpose of the Pilot Light and Thermocouple
Why do RV ovens have a pilot light you have to light first? Why do you have to hold the knob? Let’s figure out the ideas behind these steps.
The Pilot Light’s Role
The pilot light is a small, constant flame. It is like a tiny helper flame. Its only job is to be ready to light the main burner whenever you turn the oven on. It uses very little gas. It’s much simpler than trying to spark a large main burner directly every time. It makes the process of igniting Furrion RV range quicker once the pilot is set.
Deciphering the Thermocouple
The thermocouple is a safety device. Think of it as a small electric generator powered by heat. It’s a metal rod placed right in the pilot flame.
- When the Pilot is On: The heat from the pilot flame makes the thermocouple create a small electrical signal. This signal tells the oven’s gas valve, “Okay, the pilot is lit, it’s safe to let gas flow to the main burner when the user wants.”
- When the Pilot Goes Out: If the pilot flame goes out for any reason (wind, no gas, etc.), the thermocouple cools down. It stops making the electrical signal.
- Safety Action: When the signal stops, the gas valve automatically closes. This shuts off gas flow to both the pilot and the main burner. This stops unburned gas from filling your RV. This is why you must hold the knob: you are manually keeping the gas valve open to the pilot until the thermocouple gets hot enough to take over and hold the valve open itself. If your Furrion oven pilot light won’t light or stay lit after holding, the thermocouple is a prime suspect.
So, the pilot is the igniter, and the thermocouple is the safety monitor. Both are key parts of your Furrion gas oven ignition system.
Comparing Furrion Oven Models (Briefly)
Furrion makes several RV oven models. The exact steps for igniting Furrion RV range might look slightly different depending on your model.
- Look: The look of the control knob and the igniter button might vary.
- Igniter Type: Some older or simpler models might only support manual lighting (manually light RV oven). Most newer Furrion ovens have a built-in electronic igniter.
- Size: Oven sizes vary (17″, 21″). This doesn’t change the lighting process, but the burner size or pilot location might look a little different inside.
Always check the specific manual that came with your RV and oven. That manual is the best Furrion oven operation guide for your exact model. You can often find manuals online on the Furrion website if you know your oven model number.
Preparing for Travel After Using the Oven
Once you’re done cooking and the oven is cool, it’s important to shut it down properly, especially before moving your RV.
- Turn Knob to OFF: Turn the oven control knob fully to the “OFF” position. The pilot light will go out.
- Check Pilot Light: Visually confirm the pilot light is off.
- Turn Off Propane at Tank: It is a good safety practice to turn off the main propane valve at the tank(s) before driving your RV. This prevents gas leaks in case of an accident.
Following these steps is part of using your Furrion gas oven ignition system safely while parked and preparing for travel.
FAQ: Common Questions About Lighting a Furrion Oven
Here are some common questions people ask about igniting Furrion RV range ovens.
h4 What should I do if I smell gas?
Stop lighting attempts immediately. Turn off the oven knob. Turn off the gas supply at the propane tank outside. Open all windows and doors to air out the RV. Do not use any electrical switches or phones inside the RV. Get everyone out. Find the source of the leak. If you cannot find it or fix it safely (like tightening a loose fitting if you are comfortable and the leak is minor and stops when tightened), call a professional or the fire department from a safe distance.
h4 How long should I hold the oven knob in?
You need to hold the knob pushed in for about 30 to 60 seconds after the pilot light is lit. This gives the safety device (thermocouple) time to heat up and keep the gas valve open.
h4 My electric igniter clicks but the pilot doesn’t light. Why?
This usually means there’s a spark, but no gas is getting to the spark. Check your propane tank and valves. Make sure the oven knob is pushed in while you spark. The pilot tube might be blocked with dirt or a spiderweb. Gently clean the pilot area (with gas off!).
h4 The pilot light lights, but goes out when I let go of the knob. What’s wrong?
This is almost always a problem with the thermocouple. It’s not getting hot enough or is faulty. It’s not telling the gas valve to stay open. Make sure the pilot flame is hitting the thermocouple tip directly. If it is, and the flame looks good, the thermocouple probably needs replacement.
h4 Can I light the main oven burner directly without lighting the pilot first?
No, not on most standard RV ovens like Furrion. The pilot light is designed to ignite the main burner. The gas valve won’t allow gas to flow to the main burner unless the pilot safety system (thermocouple) is activated.
h4 Why is my oven flame yellow instead of blue?
A yellow or orange flame often means the gas isn’t burning cleanly. This can be caused by not enough air mixing with the gas, or by dirt/blockages in the burner tube. Sometimes it’s temporary. If it stays yellow, the burner might need cleaning or adjustment. It can also produce carbon monoxide, which is dangerous. Ensure ventilation and get it checked if it continues.
h4 Is it safe to manually light RV oven burners with a lighter?
Yes, it is safe if you use a long lighter or match designed for this. Be very careful and keep your face and hands away from the potential flame path. Ensure gas is only flowing when you are actively trying to light it.
h4 How do I clean the pilot light tube?
First, turn off the gas supply at the tank. Use a soft brush (like a new toothbrush or a small artist’s brush) to gently clean around the opening of the pilot tube. You can also use compressed air to blow out any dust or cobwebs. Do not stick anything into the small gas opening itself that could widen or damage it.
h4 My oven heats up slowly. Is that a lighting problem?
Slow heating is usually not a lighting problem itself, as long as the main burner is fully lit with a blue flame. It could be an issue with the oven thermostat, insulation, or perhaps slightly low gas pressure (though low pressure would likely cause lighting problems too). Ensure the main burner flame looks strong and even.
h4 Where can I find my specific Furrion oven operation guide?
Look in the packet of manuals that came with your RV. If you don’t have it, look for a sticker on the oven (often around the door frame or inside the storage drawer below) that has the model number. Then go to the Furrion website’s support section and search for the manual for that model number.
Bringing It All Together
Lighting your Furrion RV oven doesn’t have to be hard. By following the steps for igniting Furrion RV range – starting with the Furrion oven pilot light, holding the knob, and then lighting the main burner – you’ll be baking in no time.
Remember safety first: check for gas leaks, ensure ventilation, and keep the area clear. If your Furrion oven pilot light won’t light, walk through the troubleshooting Furrion oven ignition steps. Check for no gas flow Furrion oven, try manually light RV oven, and clean dirty parts.
Most RV oven lighting problems have simple causes. Knowing how your Furrion gas oven ignition system works makes it easier to use and fix. If you hit a complex issue, don’t hesitate to call a professional.
Happy camping and happy baking!