Simple Steps: How To Program A Universal Remote To An Element Tv

How To Program A Universal Remote To An Element Tv
Image Source: www.pcguide.com

Simple Steps: How To Program A Universal Remote To An Element Tv

Teaching your universal remote to work with your Element TV is simple. It’s like giving your remote special numbers so it knows how to talk to your TV. You just need to find the right numbers, called remote codes for Element brand tv, and follow a few easy steps. This guide helps you do that.

Preparing Your Remote and TV

Before you start programming guide universal remote, you need a few things ready. This makes the process easy.

Gather Your Supplies

Your Element TV. Make sure it is plugged in and turned on.
Your universal remote control. Put fresh batteries in it. Dead batteries can stop programming.
The instruction book that came with your universal remote. It has important info and codes. If you don’t have it, look online.
A list of universal remote codes for Element TV. We will give you some common ones later.

Ready Your Space

Sit facing your TV. Your remote needs a clear path to the TV sensor. Move anything that blocks the way. Turn off other things that use remotes, like DVD players or soundbars. This helps your remote connect only to the TV.

Finding the Right Codes

Your universal remote uses special numbers or codes to control your Element TV. Think of these Element TV control codes like phone numbers. Each TV brand has its own numbers. You need the numbers for Element TVs.

Where to Look for Codes

Remote’s Instruction Book: This is the best place to start. It has lists of codes for many TV brands. Look for ‘Element’ or ‘ELEM’.
Remote Manufacturer’s Website: Go online to the website of the company that made your universal remote. They often have updated code lists. Search for your remote model.
Online Code Databases: Many websites list remote codes. Be careful and use trusted sites.
This Guide: We will list common codes here to help you start.

Why Codes Are Important

The remote codes tell your universal remote how to send the right signals to your Element TV. Without the correct code, the remote won’t know what buttons do what on your TV. Finding the right code is key to Element TV remote setup.

Common Universal Remote Codes for Element TV

Here are some codes that often work for Element brand TVs. Try these first. Keep your TV on while you try them.

List of Element TV Codes

Here is a table with common codes for different universal remote brands. Remember, you might need to try more than one code for your TV model.

Universal Remote Brand	Common Element TV Codes
RCA	11451, 10178, 11385, 11303
GE	0004, 0016, 0100, 0178, 0451
Philips	11385, 11451
One For All	11451, 10178, 11385, 11303
DirecTV	11451, 10178, 11385, 11303
Dish Network	720, 506
Sony	0111
Logitech Harmony	(Uses online database lookup)

Note: This is not a full list. Check your remote’s book or the maker’s website for more codes.

Programming Your Universal Remote: Manual Code Entry

This is the most common way to program your remote. You will put the remote codes for Element TV directly into the remote. This teaches your remote to work with your TV.

Step-by-Step Manual Setup

Follow these steps carefully. The exact buttons might be a little different on your remote. Check your remote’s instruction book if needed.

Turn on Your Element TV: Make sure the TV is on. The remote needs to send signals to it.
Find the ‘Setup’ Button: Look on your universal remote for a button labeled ‘Setup’, ‘Set’, ‘Program’, or something similar. Sometimes it’s a small button you need a pen to push.
Press and Hold ‘Setup’: Push and hold the ‘Setup’ button. Keep holding it.
Look for a Light: While holding the ‘Setup’ button, a light on your remote should turn on. It might blink first, then stay solid. This means the remote is ready to be programmed.
Enter the TV Code: Still holding ‘Setup’ (or after the light stays solid, depending on your remote), press the button for ‘TV’ or ‘ telewizor ‘. Then let go of the ‘Setup’ button. The light should blink. Now, use the number buttons on your remote to enter one of the Element TV control codes you found. Most codes are 4 or 5 digits long.
Watch the Light: As you enter the digits, the light on the remote should blink with each number you press.
Code Accepted: After you enter the last digit, the light on the remote should turn off or give a long blink. This means the remote accepted the code. If the light blinks fast or stays on, the code might not be right or you made a mistake. Try entering the code again slowly.
Test the Remote: Point the remote at your Element TV. Press the ‘Power’ button. If the TV turns off, the code works! You are done with programming guide universal remote. Try other buttons like Volume or Channel to be sure.
Try Another Code: If the TV does not turn off, the code did not work. Repeat steps 2-8 using a different code from the list. You may need to try several codes.

Tips for Manual Entry

Write down the code that works. Keep it safe in case you need to program the remote again.
Make sure you are entering the code for the ‘TV’ device on your remote, not another device like a DVD player.
Some remotes need you to hold the device button (like ‘TV’) while you enter the code after holding ‘Setup’. Read your remote’s book.

Programming Your Universal Remote: Code Search Method

What if none of the manual codes work? Or what if you lost your remote’s instruction book and can’t find the codes? You can use the code search method. Your universal remote will search through many codes to find the one that works for your Element TV. This is a good way for universal remote control pairing when you don’t have the code.

Step-by-Step Code Search

This method takes longer than manual entry because the remote tries many codes.

Turn on Your Element TV: Your TV must be on for the remote to find the code.
Find the ‘Setup’ Button: Press and hold the ‘Setup’ or ‘Program’ button on your universal remote.
Look for a Light: A light on the remote should turn on and stay solid.
Press the TV Button: Press the ‘TV’ button on the remote. The light might blink.
Start the Search: This step is different for different remotes.
- Method A (Press Power): Press and release the ‘Power’ button on the universal remote.
- Method B (Enter 991): Enter the numbers 9-9-1 using the number buttons on the remote.
- Method C (Press Search): Some remotes have a ‘Search’ or ‘Scan’ button. Press that.
  Check your remote’s book if you are not sure how to start the search.
Remote Sends Codes: After starting the search, the light on the remote will usually start blinking slowly. This means the remote is sending out different codes, one by one.
Wait for TV to Turn Off: Point the remote at your Element TV. Wait. The remote will keep sending codes. When your Element TV turns off, the remote has found the correct code.
Stop the Search: As soon as the TV turns off, quickly press a button to stop the search. This button is usually ‘Power’, ‘Setup’, ‘Stop’, or sometimes the ‘TV’ button again. Pressing the wrong button might make the remote keep searching. Check your remote’s instructions.
Test the Remote: Turn the TV back on using the remote’s power button. Try changing channels and volume. If everything works, the code found is correct.
Find the Code Number (Optional): Some advanced remotes can tell you which code number it found after a search. This lets you write it down for later. Check your remote’s book for how to do this (often by pressing ‘Setup’ and then another button, counting light blinks).

Tips for Code Search

Keep the remote pointed at the TV during the search.
Be ready to stop the search the moment the TV turns off. If you miss it, the remote will go past the correct code. You might need to start the search again. Some remotes let you go back one code at a time if you miss it.
This method can take several minutes, especially if your TV’s code is far down the list the remote is checking.

Programming Specific Universal Remotes for Element TV

Different brands of universal remotes have slightly different steps for programming. Here are steps for a couple of common brands.

GE Universal Remote Element TV Setup

GE remotes are very common. Here is how to set one up for your Element TV using manual code entry.

Turn on your Element TV.
Find the ‘Code Search’ button. On many GE remotes, this button starts the programming process. It might be a small button.
Press and hold ‘Code Search’. Hold it until the red light stays on.
Release ‘Code Search’. The light should still be on.
Press the ‘TV’ button. The red light should blink once, then stay on.
Enter the GE universal remote Element TV code. Use the number pad. Some common GE codes for Element TV are 0004, 0016, 0100, 0178, 0451. Enter one of these.
Watch the light. The red light should turn off after you enter the last digit. This means the code is accepted.
Test the remote. Point the GE remote at the TV and press ‘Power’. If the TV turns off, it works. If not, repeat steps 3-8 with another code.

GE remotes also often have a code search method:

Turn on your Element TV.
Press and hold ‘Code Search’ until the red light stays on.
Release ‘Code Search’.
Press the ‘TV’ button. The light blinks once, then stays on.
Press the ‘Power’ button. The light will start blinking slowly.
Wait for the TV to turn off. When it does, press the ‘Enter’ button quickly. This saves the code.
Test the remote.

Philips Universal Remote Element TV Setup

Philips universal remotes also use codes. Here is a general way to program one for your Element TV.

Turn on your Element TV.
Find the ‘Setup’ button. Press and hold it until the red light stays on.
Release ‘Setup’. The light is on.
Press the ‘TV’ button. The light might blink.
Enter the Philips universal remote Element TV code. Use the number pad. Common codes are 11385, 11451. Enter one.
Watch the light. The light should turn off or blink to show the code is accepted.
Test the remote. Press ‘Power’. If the TV turns off, the code works. If not, try another code from the list by repeating steps 2-7.

Philips remotes may also have a search method, often by pressing ‘Setup’, then ‘TV’, then possibly ‘Power’ or another button to start the scan. Check your specific Philips remote instructions.

Element TV Remote Not Working? Troubleshooting Steps

Sometimes, even with the right code, your universal remote might not work perfectly or the Element TV remote setup doesn’t seem to finish. Don’t worry! Here are some things to check if your Element TV remote not working.

Check the Basics

Are batteries fresh? Low batteries are a very common reason a remote doesn’t work right or won’t program. Put in new ones.
Is anything blocking the sensor? Make sure nothing is between the remote and the TV’s sensor. Dust or dirt on the sensor can also cause problems.
Are you pointing it correctly? Point the remote directly at the TV sensor, usually on the front of the TV.
Did you select the right device? On your universal remote, make sure you pressed the ‘TV’ button before trying to control the TV. The remote might be set to control a DVD player or cable box instead.

Check the Programming Steps

Did you enter the code correctly? Go back and try manual programming again. Be very careful entering the numbers.
Did you try more than one code? TV models can be different, even from the same brand. The first code you try might not be the right one. Try all the codes listed for Element TV for your remote brand.
Did you complete the search method correctly? If using code search, did you stop the search right when the TV turned off? If you were too slow, you might need to start the search again.
Did you save the code? After a successful code search, some remotes need you to press a button (like ‘Enter’ or ‘Setup’) to save the found code. If you skipped this, the remote won’t remember the code.

Advanced Troubleshooting

Is the universal remote working at all? Does it light up when you press buttons? Can it control other devices (like a DVD player) if you programmed it for them? If not, the remote itself might have a problem.
Is the TV remote sensor working? Use your phone camera. Point your TV remote (the original one if you have it, or the universal one) at your phone’s camera lens. Press a button on the remote. You should see a light on your phone screen blinking from the end of the remote. This light is usually infrared and you can’t see it with your eyes, but phone cameras can. If you don’t see a light, the remote might be broken. If you see the light from the original remote but the universal one still doesn’t work after programming, the universal remote or the code is the problem. If neither remote shows a light or works with the TV, the TV’s remote sensor might be broken.
Try a factory reset on the universal remote. Some universal remotes can be reset to their original settings. This wipes out all programming. Then you can try programming guide universal remote from the start. Check your remote’s instruction book for how to do a factory reset.
Get help from the remote maker. If you have tried everything and the remote still won’t work with your Element TV, contact the company that made the universal remote. They might have more codes or specific troubleshooting steps for universal remote control pairing.

Manual Programming Universal Remote vs. Code Search

Both manual entry and code search methods have good points and bad points.

Manual Programming

Good: It is fast if you have the correct code. You know exactly which code works.
Bad: You must have the code list. If the codes you have don’t work, you are stuck.

Code Search

Good: You don’t need a code list. It can find codes that are not commonly listed. It is helpful if your Element TV model is newer or less common.
Bad: It can take a long time. You have to watch the TV closely and react fast to stop the search. If you miss the moment the TV turns off, you have to try again.

Most people start with manual programming if they have the codes. If that doesn’t work, they use the code search method.

Understanding Element TV Control Codes

You might see terms like ‘control codes’ or ‘IR codes’. These are just different ways to talk about the special signals your remote sends.

How Remotes and TVs Talk

When you press a button on your remote, the remote sends a beam of infrared light.
This light beam is not steady. It blinks in a very specific pattern.
This pattern is the ‘code’ or ‘control code’. Each button (like Power, Volume Up, Channel Down) has its own pattern for a specific type of device (like an Element TV).
The TV has a sensor that sees this blinking light pattern.
The TV understands what the pattern means (e.g., “turn power off”) and does the action.
A universal remote needs to learn the right blinking patterns for your Element TV. Entering the code or doing a code search teaches it these patterns.

This is why remote codes for Element brand tv are needed. They contain the instructions for the remote on how to blink the light correctly for your TV.

Saving Your Remote Settings

Once you successfully program your universal remote to your Element TV, you want it to keep working.

Keep Track of Your Code

If you used manual entry, write down the code that worked and keep it somewhere safe, like taped inside your TV cabinet or in your remote’s book. If you used code search and your remote can show you the code it found, write that number down too. This saves you time if the remote ever loses its programming (like if the batteries die completely for a long time).

Don’t Remove Batteries for Long Periods

Most universal remotes remember their programming even when you change the batteries. However, if you leave the batteries out for a very long time (weeks or months), some remotes might lose their settings. It’s best to change batteries one set at a time or replace them before they die completely.

More Tips for Element TV Remote Setup

Label buttons: If your universal remote has extra buttons you can program for other things, you can label them.
Read the book: We keep saying it because it’s true! Your remote’s instruction book has the best and most exact steps for your specific model.
Don’t rush: Take your time during programming. Follow each step carefully. If it doesn’t work the first time, try again slowly.
Consider a learning remote: Some advanced universal remotes can ‘learn’ the codes from your original remote. You point the old remote at the new one and press buttons. This is a good option if you have the original Element remote but want to use a universal one, and you can’t find a working code.

What If My Original Element Remote Isn’t Working?

If your main reason for getting a universal remote is that your Element TV remote not working, make sure it’s the remote and not the TV.

Try the phone camera test (described in the troubleshooting section) on the original remote. If you don’t see the light, the original remote is likely broken or has dead batteries.
If the original remote does show a light but the TV doesn’t respond, the TV’s remote sensor might be broken. If this is the case, a universal remote might not work either. Contact Element TV support or look into repairing the TV.

Universal Remote Control Pairing with Other Devices

A universal remote can often control more than just your Element TV. You can set it up for your:

Cable box or satellite receiver
DVD player or Blu-ray player
Soundbar or audio system
Streaming device (like a Roku or Fire Stick)

The process is similar to programming for your TV. You will select the device button on the remote (like ‘Cable’ or ‘DVD’) and then enter the codes for that specific brand of device. Your universal remote’s instruction book will have codes for these devices too.

Frequently Asked Questions (FAQ)

Why won’t any of the universal remote codes for Element TV work for my TV?

There are a few reasons. The code list you have might be old or incomplete. Your specific Element TV model might use a different set of codes. Your universal remote might not be compatible with your specific TV. Try the code search method. If that still doesn’t work, contact the universal remote manufacturer for help or try a different universal remote.

My GE universal remote Element TV setup failed. What next?

Make sure you used the steps for GE remotes specifically. Double-check the codes for GE universal remote Element TV. Try the GE code search method. Ensure the batteries are new and you are pointing the remote correctly.

How many codes do I need to try for Element TV control codes?

You might need to try several codes. Sometimes the first one works, sometimes you have to go through many. The code search method tries many codes for you automatically.

Can I use one universal remote for all my devices, including my Element TV?

Yes, that is the purpose of a universal remote control pairing. You can program it to control your TV, cable box, DVD player, etc., as long as the remote supports those devices and you have the correct codes.

I lost my manual programming universal remote instructions. Where can I find them?

Go to the website of the company that made your universal remote. Search for your remote model number. You can usually find a digital copy of the manual there, including code lists.

My universal remote power button turns the Element TV on/off, but other buttons like volume or channel don’t work right. What’s wrong?

This often means you have found a partial code. The power code works, but the codes for other functions are wrong. You need to find a different code that controls all functions correctly. Try other codes from the list or use the code search method again.

Do I need the original Element remote to program a universal remote?

No, you do not need the original Element remote for most universal remote programming methods (manual code entry or code search). You only need the original remote if your universal remote has a ‘learning’ function and you choose to program it that way.

What are Element TV control codes used for?

Element TV control codes are the specific numerical codes that tell a universal remote how to communicate with and control functions (like power, volume, channels, menu) on an Element brand television. They are the language the remote uses to send commands to the TV.

Conclusion

Programming a universal remote to your Element TV makes watching TV easier. It only takes a few simple steps: find your codes or use the search, enter the code or wait for the remote to find it, and test the buttons. With the right code and method, your universal remote will be talking to your Element TV in no time. If you run into problems, check the batteries, re-read the steps, try another code, or use the troubleshooting tips. Soon, you will have one remote to rule them all!